Products -

Prefabricated Directly Buried Hot Water Insulation Pipe
Key words:
Prefabricated Directly Buried Hot Water Insulation Pipe
Related downloads :
MATERIALOF STEELPIPE
Seamless steel pipe, LSAW steel pipe and spiral steel pipe are adopted respectively.The performance indexes are in line with national and Ministry of Petroleum standards; seamless steel pipe adopts GB/T8163-2018 standard; LSAW steel pipe and spiral steel pipe adopt GB/T9711-2017, SY/T5037-2018 and GB/T3091-2015 standard.Normally, DN20-150 adopts seamless or straight-seam steel pipe, and DN200 and above adopts spiral steel pipe, and various kinds of steel pipes required by users can also be adopted according to the needs of the project.
EXTERNALLY PROTECTED PIPES
It is made of high-density polyethylene with high mechanical strength and excellent corrosion resistance.It can ensure that the pipe can withstand the damage of external general factors during transportation, installation and use.During the production process, the low temperature plasma generated by the electrode tip generates corona treatment on the inner surface of the outer protective layer of polyethylene, and the inner surface tension of the outer pipe after corona treatment reaches more than 50 dynes/cm, which enhances the adhesion between the thermal insulation layer and the outer pipe, and improves the shear strength.For improving the overall internal quality of the insulation pipe, extend the service life of the insulation pipe has a significance that can not be ignored.
INSULATION LAYER
The foam is a non-fluorinated, fully water-based rigid polyurethane foam from a specialized polyurethane raw material supplier.The material has zero ODP value, which protects the environment and reduces damage to the ozone layer.It has certain fluidity and bonding strength, and after high-pressure mixing and injection, the foam fully fills the gap between the steel pipe and the outer pipe to ensure that the steel pipe, the outer pipe and the thermal insulation layer form a solid whole.
ELECTROTHERMALFUSION INTERFACE
Utilizing the principle of polyethylene heat fusion, through the electric heating, pressurized CNC wire cloth system, the electric wire network with precise resistance value and temperature-controlled electric coupling feedback heating wire are embedded in the inner wall of the strip sleeve.On-site interface, the use of special temperature-controlled electric fusion welding machine and the implementation of a strict heating welding curve, electrically heated band sleeve and the pipe's outer pipe, so that it fused into one, to complete the sealing connection of the outer pipe of the insulation pipeline.The tensile strength of the heat fusion interface is not lower than that of the parent material.
HERMAL CONTRACTION INTERFACE
The special heat-shrinkable tape is heated and contracted by flame to connect the outer pipe and the joint casing lap tightly and flexibly, which not only ensures the sealing and waterproofing of the joint, but also solves the axial thermal strain of the joint.This method is easy to operate, especially convenient and practical for small and medium diameter pipes.The peeling strength of heat-shrinkable tape used in heat-shrinkable tape casing type joint is not less than 60N/cm. 100% airtightness test of our company's heat preservation pipeline interface, airtightness test can be injected into the material foam heat preservation only after passing the test.
Prefabricated Directly Buried Hot Water Insulation Pipe and Fittings Specifications | |||
Norm | Working Tubes | Sheath | Insulation Thickness |
(mm) | Outer diameter*Wall thickness(mm) | Outer diameter*Wall thickness(mm) | (mm) |
25 | 32*3 | 90*2.2 | 26.8 |
32 | 38*3 | 110*2.5 | 33.5 |
40 | 45*3.5 | 110*2.5 | 30 |
40 | 48*3.5 | 110*2.5 | 28.5 |
50 | 57*3.5 | 125*2.5 | 31.5 |
50 | 60*3.5 | 125*2.5 | 30 |
70 | 76*4 | 140*3.0 | 30 |
80 | 89*4 | 160*3.0 | 32.5 |
100 | 108*4 | 200*3.2 | 42.8 |
100 | 114*4 | 200*3.2 | 39.8 |
125 | 133*4.5 | 225*3.5 | 42.5 |
125 | 140*4.5 | 225*3.5 | 39 |
150 | 159*5 | 250*3.9 | 41.6 |
150 | 165*4.5 | 250*3.9 | 38.6 |
200 | 219*6 | 315*4.9 | 43.1 |
250 | 273*6 | 365*2.6 | 40.4 |
300 | 325*7 | 420*7 | 40.5 |
350 | 377*7 | 500*7.8 | 53.7 |
400 | 426*7 | 550*8.8 | 53.2 |
450 | 478*7 | 600*9.3 | 51.7 |
500 | 529*8 | 655*9.8 | 53.2 |
600 | 630*8 | 760*11 | 54 |
700 | 720*9 | 850*12 | 53 |
800 | 820*10 | 955*13 | 54.5 |
900 | 920*10 | 1054*14 | 53 |
1000 | 1020*12 | 1155*15 | 52.5 |
1200 | 1220*14 | 1370*16 | 58 |
1400 | 1420*16 | 1600*17 | 73 |
1600 | 1620*18 | 1820*18 | 82 |
Previous Page
Next Page
Previous Page
Next Page
Related Product
Prefabricated Directly Buried Hot Water Insulation Pipe
Prefabricated insulation elbow
Prefabricated insulation across three
Consult Now
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!